Sebring Convertible V6-2.5L VIN H (1997)
8. Install vehicle wiring harness connector onto power steering fluid pressure switch on steering gear assembly. Be sure locking tab on wiring harness
connector is securely latched to pressure switch.
9. Install the antilock brakes hydraulic control unit mounting bracket on the front suspension crossmember. Install the 3 mounting bracket to
crossmember attaching bolts and tighten to a torque of 28 Nm (250 inch lbs.).
10. Loosely install the 2 shock absorber clevis to lower control arm attaching nuts and bolts.
11. Install tie rod seal boot heat shield on tie rod end.