Caliber L4-2.4L (2009)
Trunk / Liftgate Striker: Service and Repair
Striker - Removal
REMOVAL
1. Open the liftgate.
2. Remove the liftgate sill scuff plate See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Scuff Plate - Removal.
NOTE: Place a reference mark along the outer edge of the striker to ensure it is reinstalled to its original position.
3. Mark the position of the striker (1) on the liftgate opening lower panel to aid installation.
4. Remove the two screws (4) that secure the striker to the lower panel and remove the striker.
