Caliber L4-2.4L (2009)
13. Connect the lower ball joint stud (6) to the knuckle (3).
14. Install a NEW ball joint stud pinch bolt (4) and nut (5). Tighten the nut to 82 Nm (60 ft. lbs.).
15. Install the fore/aft crossmember (4), See:
16. Install the front wheels (1), See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
17. With the full weight of the vehicle on the suspension tighten the front control arm bushing bolts to 123 Nm (91 ft. lbs.)
18. Perform wheel alignment as necessary. See: Maintenance/Alignment/Service and Repair