Caliber L4-2.4L (2009)
19. Install the rear roll mount (4) and install the three bolts (3) attaching it to the crossmember.
20. Tighten the bolts (3) to 153 Nm (112 ft. lbs.).
21. Install the through bolt (2) and tighten to 65 Nm (48 ft. lbs.).
22. If equipped, install the belly pan.
23. Install the three front screws (4), the three rear screws (2) and push pin fasteners into the center of the belly pan.
Rear Suspension
INSTALLATION
1. Install the stabilizer bar and install the bushings and bolts (1).
