Caliber L4-2.4L (2009)
2. Tighten the bolts to 61 Nm (45 ft. lbs.).
3. Position the suspension knuckle assemblies back into position onto the crossmember.
4. Install the toe link cam bolts (1) at the cradle.
5. Tighten the bolts to 35 Nm (26 ft. lbs.).
6. Install the upper link bolts (2) at the cradle.
7. Tighten the bolts to 90 Nm (70 ft. lbs.).
8. Install the lower link bolts (5 and 6) at the cradle.
9. Tighten the bolts to 90 Nm (70 ft. lbs.).
