Challenger V8-5.7L (2010)
5. Install the supply hose (3) on the power steering pump (1) and securely tighten the hose clamp.
CAUTION: Do not let the tensioner arm snap back to the free arm position, sever damage may occur to the tensioner.
6. Rotate the accessory drive belt tensioner (7) counterclockwise until it contacts its stop and position the accessory drive belt (4) onto the pulleys.
7. Position the air filter assembly into the vehicle.
8. Install the air filter assembly retaining bolt (3) and securely tighten.
9. Connect the make up air hose (2).
10. Install the clean air tube (4) to the throttle body and the air filter assembly and securely tighten the clamps.
11. Connect the intake air temperature (IAT) sensor (5) connector.
12. Install the engine cover (1).