Magnum SRT-8 V8-6.1L VIN 3 (2006)
12. Place 13 mm 12-point box wrench (2) over cable retainer (1) at lever bracket as shown to collapse retainer fingers. Pull cable from bracket.
13. Remove parking brake cable grommet (2) from floor pan (3).
14. Remove parking brake cable (7) through hole in floor pan.
INSTALLATION
1. Guide parking brake cable (7) down through hole in floor pan.
2. Install parking brake cable grommet (2) in hole of floor pan (3).
3. Guide cable end (3) up through lever bracket and press cable housing retainer (7) into bracket allowing retainer fingers to lock cable in place.
4. Connect front parking brake cable strand (3) at lever connector (2).
5. Lay carpet back into place and install retaining clip.
6. Install driver door opening sill scuff plate and cowl side trim.
