Magnum SRT-8 V8-6.1L VIN 3 (2006)
2. Guide cable leading end through crossmember bracket (1 - left)(2 - right) near equalizer and press cable housing retainer into bracket allowing
retainer fingers to lock cable in place.
3. Insert opposite end of cable (2) through rear knuckle (3) and install mounting screw (4). Tighten screw to 8 Nm (71 inch lbs.) torque.
4. Install shoe actuator lever (1) on end of parking brake cable (2). Make sure actuator lever is positioned with word UP facing outward.
5. Install parking brake shoes as well as all components necessary to access them.
