Magnum SRT-8 V8-6.1L VIN 3 (2006)
NOTE: Due to short travel and low spring tension, it is not necessary to lock out parking brake lever to service parking brake components.
6. Connect rear parking brake cable at equalizer/front cable as follows:
-
If installing left rear cable, connect cable (1) at equalizer (2) above rear axle differential (not shown) and rear crossmember (6).
-
If installing right rear cable, connect cable (4) at connector (3) above rear axle differential (not shown) and rear crossmember (6).
7. Lower vehicle until rear wheels are just above floor level.
8. Apply parking brake lever. Release lever, then reapply.
9. Check to make sure rear wheels will not rotate with lever applied.
10. Release parking brake lever, then check to make sure rear wheels rotate without excessive drag.
11. Adjust parking brake shoes as necessary.
12. Lower vehicle.
