RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Position the upper C-pillar trim panel (5) to the C-pillar (4).
2. Engage the retaining tabs that secure the upper C-pillar trim panel to the C-pillar.
3. Install the bolt (2) that secures the seat belt (3) to the top of the C-pillar. Tighten the bolt to 40 N.m (30 ft.lbs.).
4. Install the cap (1) onto the seat belt.
Rear Cab Back Panel Trim
REAR CAB BACK PANEL TRIM
REMOVAL
1. If equipped, remove the three bolts (1) that secure the rear storage compartment (2) to the floor panel (3) and remove the storage compartment
from the rear cab trim panel (4).