RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Route the seat belt (2) through the slot in the lower C-pillar trim panel (1) and position the trim panel to the C-pillar (4).
2. Engage the retaining tabs that secure the lower C-pillar trim panel to the C-pillar.
3. Install the bolt (3) that secures the seat belt to the bottom of the C-pillar. Tighten the bolt to 40 N.m (30 ft.lbs.).
4. Install the upper C-pillar trim panel.
C-Pillar Upper Trim
C-PILLAR UPPER TRIM
REMOVAL
1. Remove the cap (1) and then the bolt (2) that secures the seat belt (3) to the top of the C-pillar (4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel (5) to the C-pillar and remove the
trim panel.
INSTALLATION
