RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
5. Install the grab handle (1) onto the B-pillar and install the two bolts (3). Tighten the bolts to 6 N.m (55 in.lbs.).
6. Close the two fastener covers (2) located on the grab handle.
C-Pillar Lower Trim
C-PILLAR LOWER TRIM
REMOVAL
1. Remove the upper C-pillar trim panel, Refer to Trim Panel.
2. Remove the bolt (3) that secures the seat belt (2) to the bottom of the C-pillar (4) and position the seat belt out of the way.
3. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower C-pillar trim panel (1) to the C-pillar.
4. Remove the seat belt from the lower C-pillar trim panel through the slot provided and remove the trim panel.
INSTALLATION
