Sprinter 2500 V6-3.0L DSL Turbo (2008)
6. Install the left outer tie rod end (3) and jam nut (2) to the inner tie rod (1).
7. Install both the outer tie rod ends (3) to the steering knuckle (6). Tighten to 50 Nm (37 ft. lbs.) Plus an additional 60° turn.
8. Install the upper stabilizer bar link to the stabilizer bar.
9. Install the front wheels.
10. Fill and bleed the power steering system See: Power Steering/Power Steering Bleeding/Service and Repair/Power Steering Pump Fill and Bleed
Procedure
11. Reset toe adjustment See: Alignment/Service and Repair.
12. Check steering system for leaks.