Stratus Coupe V6-3.0L VIN H (2001)
STEP 8. Check combination meter connector C-102 for damage.
Q: Is combination meter connector C-102 in good condition?
YES: Go to Step 9.
NO: Repair or replace it. Refer to Harness Connector Inspection. The door ajar warning light should work normally.
STEP 9. Check the harness wires between combination meter connector C-102 and ignition switch (IG1).
NOTE: After checking junction block connectors C-308 and C-310, joint connector C-141 and intermediate connector C-209, check the wires. If
junction block connectors C-308 and C-310, joint connector C-141 and intermediate connector C-209 are damaged, repair or replace them. Refer to
Harness Connector Inspection.
Q: Are the harness wires between combination meter connector C-101 and ignition switch (IG1) in good condition?
YES: There is no action to be taken.
NO: Repair or replace them. The door ajar warning light should work normally.
