Stratus Coupe V6-3.0L VIN H (2001)
STEP 8. Check the passenger's door lock actuator switch.
Q: Is the passenger's door lock actuator switch in good condition?
YES: Go to Step 9.
NO: Replace it. The input signal from the passenger's door lock actuator switch should be able to be checked and the functions, which are described in
the "Technical Description (comment)," should work normally.
STEP 9. Check the passenger's door lock actuator switch ground circuit at passenger's door lock actuator switch connector E-07.
1. Disconnect passenger's door lock actuator switch connector E-07 and measure at the harness side.
2. Measure the resistance between terminal 3 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 12.
NO: Go to Step 10.
STEP 10. Check passenger a door lock actuator switch connector E-07 for damage.
Q: Is passenger's door lock actuator switch connector E-07 in good condition?
YES: Go to Step 11.
NO: Repair or replace it. Refer to Harness Connector Inspection. The input signal from the passenger's door lock actuator switch should be able to be
checked and the functions, which are described in the "Technical Description (comment)," should work normally.
