Stratus Coupe V6-3.0L VIN H (2001)
STEP 13. Check the harness wires between passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-312.
NOTE: After checking intermediate connector C-213, check the wires. If intermediate connector C-213 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-312 in good condition?
YES: Replace the ETACS-ECU. The input signal from the passenger's door lock actuator switch should be able to be checked and the functions,
which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the passengers door lock actuator switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
Inspection Procedure O-11
The door lock switch (incorporated in power window main switch and power window sub switch) signal is not sent to the ETACS-ECU.