ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Disassembly and Assembly > < Electric Booster Heater

C-MAX 2003.75 (06.2003-)

Auxiliary Heating - Auxiliary Coolant Flow Pump C-MAX 2003.75 (06/2003-)
Removal and Installation

Special Tool(s)

Remover/Installer, Hose Clamp

303-397
  1. Drain the cooling system.
    For additional information, refer to: Kühlsystem entleeren, mit Kühlmittel auffüllen und entlüften (303-03A Kühlsystem - 1.6L Duratec-16V (Sigma), General Procedures) /
    Kühlsystem entleeren, mit Kühlmittel auffüllen und entlüften (303-03B Kühlsystem - 1.6L Duratec-16V Ti-VCT (Sigma), General Procedures) /
    Kühlsystem entleeren, mit Kühlmittel auffüllen und entlüften (303-03C Kühlsystem - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4), General Procedures) /
    Kühlsystem entleeren, mit Kühlmittel auffüllen und entlüften (303-03D Kühlsystem - 1.6L Duratorq-TDCi (DV) Diesel, General Procedures) /
    Kühlsystem entleeren, mit Kühlmittel auffüllen und entlüften - 2.0L (303-03E Kühlsystem - 2.0L Duratorq-TDCi (DW) Diesel, General Procedures).

2. Remove the components in the order indicated in the following illustration(s) and table(s).

NOTE:
NOTE:Removal of the fuel fired booster heater coolant pump is performed from below.

 
Item
Part Number
Description
1
-
Fuel fired booster heater coolant pump connector
2
-
Coolant hose - fuel fired booster heater to fuel fired booster heater coolant pump.
3
-
Coolant hose - engine to fuel fired booster heater coolant pump.
4
-
Fuel fired booster heater coolant pump bolt
5
-
Fuel fired booster heater coolant pump

3. To install, reverse the removal procedure.

Disassembly and Assembly > < Electric Booster Heater