Removal and Installation Special Tool(s) | Release Tool. Belt Tensioner 303-676 (21-235) | General Equipment Dowel with a diameter of 5mm 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Battery to generator cable electrical connector 2 - Generator electrical connector 6 - Accessery drive belt idler pulley retaining bolt cover 7 - Accessery drive belt idler pulley and idler pulley retaining bolt 5. To install, reverse the removal procedure. Removal Details Item 3 : Accessery drive belt tensioner | -
Using the special tool, detention the accessory drive belt tensioner. Remove the dowel and remove the special tool. | Item 5 : Generator upper front retaining bolt Installation Details Item 8 : Generator lower retaining bolts | -
Loosely install the generator upper retaining bolts before tightening the generator lower retaining bolts. | Item 5 : Generator upper front retaining bolt | -
Tighten the generator upper front retaining bolt. | Item 4 : Generator upper rear retaining bolt | -
Tighten the generator upper rear retaining bolt. | Item 3 : Accessery drive belt tensioner | -
Using the special tool reset the accessory drive belt tensioner to the detention position. - Rotate the tensioner clockwise.
| |