Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Headlamp Masking - Vehicles Built Up To: 03-2007 >
< Headlamp Leveling
C-MAX 2003.75 (06.2003-)
Mechanical Repairs
4 Electrical
417 Lighting / 417-01 Exterior Lighting
Description and Operation
Diagnosis and Testing
General Procedures
Headlamp Adjustment
Exterior Lighting - Headlamp Adjustment
C-MAX 2003.75 (06/2003-)
General Procedures
General Equipment
Headlamp beam setting equipment
Park the vehicle on a level surface.
Ensure that the tire pressures are to specification and that the vehicle is not overloaded.
Switch on the dipped beam.
Repeatedly actuate the headlamp levelling switch and then set it to "0".
Set the measuring screen of the headlamp beam setting equipment to the correct headlamp alignment setting.
Adjust the dipped beam so that the light/dark boundary touches the horizontal line.
NOTE:
Scattered light from the dipped beam may cross the 15 degree line.
Adjust the dipped beam so that the rising line of the light/dark boundary lies at the point of intersection of the horizontal line and the 15° line.
Mechanical Repairs
4 Electrical
417 Lighting / 417-01 Exterior Lighting
Description and Operation
Diagnosis and Testing
General Procedures
Headlamp Adjustment
Headlamp Masking - Vehicles Built Up To: 03-2007 >
< Headlamp Leveling