ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Wheel Speed Sensor > < Hydraulic Control Unit (HCU) - 2.5L RHD
Anti-Lock Control - Front Wheel Speed Sensor Cougar 1999 (08/1998-01/2001)
Removal and Installation

Removal

  1. Loosen the wheel nuts.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.
  1. Remove the wheel.

  1. Remove the wheel sensor.

  1. Disconnect the wheel sensor wiring from the support bracket and clips.
  1. Remove the fender splash shield. For additional information, refer to Section  501-02 Front End Body Panels.

  1. Disconnect the wheel sensor electrical connector.

Installation

  1. To install, reverse the removal procedure.

Rear Wheel Speed Sensor > < Hydraulic Control Unit (HCU) - 2.5L RHD