Ford Workshop Service and Repair Manuals

Pliers, Oil Seal, Valve Stem

303 - 508 (21211)

Installer, Oil Seal, Intake Valve Stem

303 - 247 (21130A)

1. Remove the valve spring.
   For additional information, refer to Valve Springs in this section.
   

2. Using the special tools, remove the valve stem seal.
   1. Install special tool.
   2. Install the special tool to remove the seal.

1. 

   NOTE:Cover the valve collet groove on the valve stem with a protective sleeve.
   Using the special tool, install the new valve stem seal.
   • Remove the protective sleeve.

2. Install the valve spring.
   For additional information, refer to Valve Springs in this section.