E 450 V10-6.8L (2008)
Valve Train Components - Exploded View (Part 2)
Removal
1. Remove the timing drive components.
2. Install the special tool between the valve spring coils to protect the valve stem seal from damage.
3. CAUTION: The camshaft roller followers must be installed in their original locations. Record camshaft roller follower locations. Failure
to follow these instructions may result in engine damage.
NOTE: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the cylinder
head must be removed.
NOTE: It may be necessary to push the valve down while compressing the spring.