Edge AWD V6-3.5L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Pump to Steering Gear Pressure Line
Power Steering Pump to Steering Gear Pressure Line
Removal and Installation
NOTICE: When repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the pressure line-to-steering gear banjo bolt and disconnect the pressure line from the steering gear.
-
Discard the 2 seals.
-
To install, tighten to 48 Nm (35 lb-ft).
