Expedition 2WD V8-281 4.6L VIN W EFI (1997)
9. Install the transmission fluid pan.
(1) Position the transmission pan gasket.
(2) Position the transmission fluid pan.
NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage; if not damaged, reuse the gasket.
10. Install the transmission fluid pan bolts.
11. Remove the supports and lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
12. Reconnect the battery ground cable.
NOTE:When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module
relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
13. Fill the transmission with fluid and check for proper operation.
