Expedition 2WD V8-281 4.6L VIN W EFI (1997)
4. Install the converter drain back valve and solenoid pressure supply screen.
5. Install the separator plate and gaskets.
6. Install the three reinforcement plates.
(1) Position the three reinforcement plates.
(2) Install the ten bolts.
7. Install the shift solenoid.
(1) Position the shift solenoid.
(2) Position the TCC solenoid.
(3) Install the bolt.
NOTE: Inspect the shift solenoid O-rings and TCC solenoid O-rings for damage.