ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3134 > < Initial Inspection and Diagnostic Overview|Page 3132
Page 17
background image

-

Is the resistance less than 5 ohms?

Yes

GO to F3.

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
F3 CHECK THE HS-CAN CIRCUITS BETWEEN THE 4X4 CONTROL MODULE AND THE DLC FOR AN OPEN

 

-

Measure the resistance between the 4X4 control module C2371a-10, circuit VDB04 (WH/BU), harness side and the DLC C251-6, circuit VDB04
(WH/BU), harness side.

-

Measure the resistance between the 4X4 control module C2371a-9, circuit VDB05 (WH), harness side and the DLC C251-14, circuit VDB05
(WH), harness side.

-

Are the resistances less than 5 ohms?

Initial Inspection and Diagnostic Overview|Page 3134 > < Initial Inspection and Diagnostic Overview|Page 3132