ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3155 > < Initial Inspection and Diagnostic Overview|Page 3153
Page 38
background image

-

Are the voltages greater than 10 volts?

Yes

GO to L2.

No

VERIFY the Battery Junction Box (BJB) fuse 64 (30A) is OK. If OK, REPAIR the circuit in question. If not OK, REFER to the Wiring Diagrams to
identify the possible causes of the circuit short. CLEAR the DTCs. REPEAT the network test with the scan tool.  See: Diagrams/Electrical
Diagrams/Diagrams By Number

-------------------------------------------------
L2 CHECK THE AUDIO DSP MODULE GROUND CIRCUITS FOR AN OPEN

 

-

Ignition OFF.

-

Disconnect: Negative Battery Cable.

-

Measure the resistance between the audio DSP module, harness side and ground as follows:

Initial Inspection and Diagnostic Overview|Page 3155 > < Initial Inspection and Diagnostic Overview|Page 3153