ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3202 > < Initial Inspection and Diagnostic Overview|Page 3200
Page 85
background image

-

Is the resistance less than 5 ohms?

Yes

GO to W21.

No

CONNECT the negative battery cable. GO to W59.

-------------------------------------------------
W21 VERIFY VEHICLE EQUIPMENT - DSM

 

-

Inspect the vehicle for a Driver Seat Module (DSM).

-

Is the vehicle equipped with a DSM?

Yes

GO to W22.

No

GO to W23.

-------------------------------------------------
W22 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DSM DISCONNECTED

 

-

Disconnect: DSM C341d.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to W23.

No

CONNECT the negative battery cable. GO to W60.

-------------------------------------------------
W23 VERIFY VEHICLE EQUIPMENT - DCSM

 

-

Inspect the vehicle for a Dual Climate Controlled Seat Module (DCSM).

-

Is the vehicle equipped with a DCSM?

Yes

Initial Inspection and Diagnostic Overview|Page 3202 > < Initial Inspection and Diagnostic Overview|Page 3200