ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3203 > < Initial Inspection and Diagnostic Overview|Page 3201
Page 86
background image

GO to W24.

No

GO to W25.

-------------------------------------------------
W24 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE DCSM DISCONNECTED

 

-

Disconnect: DCSM C3265c.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to W25.

No

CONNECT the negative battery cable. GO to W61.

-------------------------------------------------
W25 VERIFY VEHICLE EQUIPMENT - GPSM

 

-

Inspect the vehicle for a Global Positioning System Module (GPSM).

-

Is the vehicle equipped with a GPSM?

Yes

GO to W26.

No

GO to W27.

-------------------------------------------------
W26 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE GPSM DISCONNECTED

 

-

Disconnect: GPSM C2398.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

Initial Inspection and Diagnostic Overview|Page 3203 > < Initial Inspection and Diagnostic Overview|Page 3201