F 150 4WD V8-4.6L VIN 8 (2010)
No
CONNECT the negative battery cable. GO to Y37.
-------------------------------------------------
Y18 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE APIM DISCONNECTED
-
Disconnect: APIM C2283.
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to Y19.
No
CONNECT the negative battery cable. GO to Y38.
-------------------------------------------------
Y19 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE IC DISCONNECTED
-
Disconnect: IC C220.
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.
-
Is the resistance less than 5 ohms?
Yes
If the vehicle is equipped with a telematics module, GO to Y20.
If the vehicle is not equipped with a telematics module, REPAIR the circuits. CONNECT all modules. CONNECT the negative battery cable. CLEAR
the DTCs. REPEAT the network test with the scan tool.
No
CONNECT the negative battery cable. GO to Y39.
-------------------------------------------------
Y20 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE TELEMATICS MODULE
DISCONNECTED
-
Disconnect: Telematics Module C2409.
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
