ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accessory Drive Belt Tensioner - 1.8L Endura-DI (Lynx) Diesel > < Accessory Drive Belt - 1.4L PTE (CVH)

Fiesta 1996 (08.1995-02.2002)

Accessory Drive - Accessory Drive Belt Tensioner—1.25L/1.4L Zetec-SE (Sigma) Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Remove the accessory drive belt.
    • Rotate the accessory drive belt tensioner counterclockwise.

  1. Remove the accessory drive belt tensioner.

Installation
  1. NOTE:
    NOTE:Make sure the drive belt is correctly located on all pulleys.
    To install, reverse the removal procedure.

Accessory Drive Belt Tensioner - 1.8L Endura-DI (Lynx) Diesel > < Accessory Drive Belt - 1.4L PTE (CVH)