Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
501-14 Handles, Locks, Latches and Entry Systems|Specifications >
< Door Lock Cylinder
Fiesta 1996 (08.1995-02.2002)
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems / Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Liftgate Latch Actuator
Handles, Locks, Latches and Entry Systems - Liftgate Latch Actuator
Fiesta 1996 (08/1995-02/2002)
Removal and Installation
Removal
Disconnect the battery ground cable.
Remove the tailgate lock barrel assembly (refer to procedure contained in this section).
Disconnect the motor to lock actuating rod.
Disconnect the multiplug and ground lead.
Disconnect the multiplug.
Remove the ground lead retaining bolt.
Remove the two motor retaining screws.
Remove the motor.
Installation
NOTE:
Make sure the actuating rod is correctly located in the lock lever when refitting.
To install, reverse the removal procedure.
Mechanical Repairs
5 Body and Paint / 501 Body and Paint
501-14 Handles, Locks, Latches and Entry Systems / Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Liftgate Latch Actuator
501-14 Handles, Locks, Latches and Entry Systems|Specifications >
< Door Lock Cylinder