Audio Unit - Audio Unit—Vehicles Built Up To: 10/2005
Fiesta 2002.25 (11/2001-)
Removal and Installation
Removal
NOTE:It is not necessary to remove the audio unit in order to obtain the serial number. To obtain the serial number, simultaneously PRESS buttons 2 and 6. The serial number will be shown in the audio unit display.
Remove the climate control assembly. For additional information, refer to Section 412-04 Control Components.
Detach the audio unit from the instrument panel.
Disconnect the electrical connectors and remove the audio unit.
Disconnect the electrical connector.
Disconnect the antenna cable connector.
Remove the audio unit rear support.
Installation
CAUTION:To prevent damage to the new audio unit while installing the climate control and audio unit trim panel, apply masking tape to the three sections of the audio unit.
CAUTION:To prevent possible damage to the audio unit while connecting the electrical connector, make sure that the antenna cable connector is connected first.
CAUTION:The audio unit wiring harness must not become trapped when installing the audio unit.
NOTE:The audio unit rear support must engage with the audio unit support bracket.