Five Hundred 2WD V6-3.0L VIN 1 (2006)
Possible Causes
-
high speed CAN circuit 1908 (WH) or 1909 (BK) open
-
TCM C199
-
TCM
Test D: The Transmission Control Module (TCM) Does Not Respond To The Diagnostic Tool -
6-Speed Transaxle
PINPOINT TEST D: THE TRANSMISSION CONTROL MODULE (TCM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL -
6-SPEED TRANSAXLE
D1
D2-D3
Normal Operation
The TCM communicates with the diagnostic tool through the high speed controller area network (CAN), circuits 1908 (WH) and 1909 (BK). The high
speed CAN is not designed to operate under single point fault conditions. If either circuit is shorted to voltage or the high speed CAN data plus is
