Flex FWD V6-3.5L (2010)
26. Attach the cables and wire harness to the outboard recliner.
-
If equipped, attach the manual lumbar cable retainer to the outboard recliner.
-
Attach the side air bag module wire harness pin-type retainer to the outboard recliner.
-
Attach the fold-flat cable retainer and cover to the outboard recliner.
27. Close the zippers and attach the backrest cover retainers.
28. Install the inboard upper recliner cover in the following sequence.
1. Align the inboard upper recliner cover pocket to the recliner bracket.
2. Pivot the top of the inboard upper recliner cover forward and attach the pocket to the bracket.
3. Push in at the front and seat the clip.
29. Install the outboard upper recliner cover in the following sequence.
1. Position the fold-flat release strap through the opening.
2. Align the outboard upper recliner cover pocket to the recliner bracket.
3. Pivot the top of the outboard upper recliner cover forward and attach the pocket to the bracket.
4. Push in at the front and seat the clip.
30. If not equipped with a DVD player, install the 2 head restraint guides sleeves. For additional information, refer to Head Restraint Guide Sleeve
See: Head Rest/Service and Repair/Head Restraint Guide Sleeve.
31. Install the seat backrest. For additional information, refer to Seat Backrest - Front, With Fold Flat See: Removal and Replacement/Front Seat/Seat
Backrest - Front, With Fold Flat.
Seat Backrest - Second Row, 40 Percent
Seat Backrest - Second Row, 40 Percent
Disassembly and Assembly
Quad Bucket and 40 Percent Backrest