Flex FWD V6-3.5L (2010)
NOTE: LH shown, RH similar.
1. Remove the seat. For additional information, refer to Seat - Second Row See: Service and Repair/Rear Seat/Seat - Second Row.
2. Remove the seat backrest. For additional information, refer to Seat Backrest - Second Row, 40 Percent See: Removal and Replacement/Rear
Seat/Seat Backrest - Second Row, 40 Percent.
3. Remove the head restraint assembly.
4. NOTICE: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn
from the seat backrest foam.
Release the hook-and-loop strips, invert the backrest trim cover, remove the 2 rows of hog rings and invert to the top of the backrest frame.
-
If equipped, route the heated seat wire harness around the backrest trim cover.
