Flex FWD V6-3.5L (2010)
1. Remove the affected third row backrest. For additional information, refer to Seat Backrest - Third Row See: Removal and Replacement/Rear
Seat/Seat Backrest - Third Row.
2. Pull up on the head restraint, push the head restraint guide button in and remove the head restraint.
3. Invert the backrest trim cover and remove 2 rows of 3 hog rings.
4. NOTE: Head restraint guide with release button goes on the LH side.
Release 2 tabs on each head restraint guide and remove.
5. Remove the backrest trim cover.
-
Pull the strap through the trim cover.
6. Remove the backrest foam pad.
7. Remove the bushing.
8. To assemble, reverse the disassembly procedure.