ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
General Procedures|Removal and Installation > < External Controls

Focus 1999 (08.1998-12.2004)

Automatic Transmission/Transaxle External Controls - Vehicles With: 4F27E - Selector Lever Cable Adjustment Focus 1999 (08/1998-12/2004)
General Procedures

Adjustment
  1. Shift selector lever in position "D".
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. NOTE:
    NOTE:Make sure the selector lever cable outer sleeve is free for moving after unlocking.
    Open the selector lever cable locking mechanism (turn counterclockwise).

  1. NOTE:
    NOTE:The TR sensor mark must be inline with the transaxle selector lever.
    Move the transaxle selector lever to position "D" (TR sensor removed shown).

  1. Close the selector lever cable outer sleeve by turning the locking mechanism clockwise.
  1. Lower the vehicle.
  1. Check the selector lever cable adjustment.

General Procedures|Removal and Installation > < External Controls