Ford Workshop Service and Repair Manuals > Focus 2004.75 (07.2004-) > Mechanical Repairs | 2 Chassis | 206 Brake System | 206-03 Front Disc Brake | Diagnosis and Testing | Removal and Installation

Front Disc Brake - Brake Caliper

Focus 2004.75 (07/2004-)

Removal and Installation

Remove the wheel and tire. For additional information, refer to Section 204-04 Wheels and Tires.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

Brake caliper retaining bolt covers

Brake caliper retaining bolts

3. To install, reverse the removal procedure.

Bleed the brake system. For additional information, refer to Section 206-00 Brake System - General Information.

Removal Details

Loosen the brake hose to brake caliper union.
1. Using a suitable brake hose clamp, clamp the brake hose.
1. Loosen the union.

NOTE:The inner brake pad is secured to the brake caliper piston by a spring clip.

Remove the inner brake pad.

CAUTION:Cap the brake hose to prevent fluid loss or dirt ingress.

Disconnect the brake hose from the caliper.
- Rotate the caliper counterclockwise.

Installation Details

Ford Workshop Service and Repair Manuals