ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Brake Disc - 2.5L Duratec-ST (VI5) > < Brake Caliper - 2.5L Duratec-ST (VI5)

Focus 2004.75 (07.2004-)

Front Disc Brake - Brake Disc Focus 2004.75 (07/2004-)
Removal and Installation

  1. Remove the wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Brake caliper anchor plate retaining bolts
2
-
Brake caliper and anchor plate
See Removal Detail
3
-
Brake disc
See Removal Detail

3. To install, reverse the removal procedure.

NOTE:
NOTE:Make sure the wheel hub face is clean and free of rust and foreign material.
  1. If a new brake disc has been installed, install new brake pads.
    For additional information, refer to Brake Pads in this section.

Removal Details

Item 2 : Brake caliper and anchor plate

CAUTION:
CAUTION:Suspend the brake caliper and anchor plate to prevent load being placed on the brake hose.
  1. Detach the brake caliper and anchor plate from the wheel knuckle.

Item 3 : Brake disc

NOTE:
NOTE:Remove and discard the retaining washer (if equipped).

Brake Disc - 2.5L Duratec-ST (VI5) > < Brake Caliper - 2.5L Duratec-ST (VI5)