ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Fluid Cooler - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma) > < Power Steering Pump to Steering Gear Pressure Line - Vehicles With: Electro-Hydraulic Power Steering (EHPS)

Focus 2004.75 (07.2004-)

Power Steering - Power Steering Pressure Line and Return Line Assembly—Vehicles With: Electro-Hydraulic Power Steering (EHPS) Focus 2004.75 (07/2004-)
Removal and Installation

Removal

All vehicles
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the right-hand front wheel and tire.
    Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

  1. CAUTION:
    CAUTION: Make sure that all openings are sealed.
    Torque: 30 Nm

  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.

  1. Torque: 7 Nm

  1. Torque: 23 Nm

  1. Torque: 7 Nm
Left-hand drive vehicles
  1. Torque: 4 Nm
Right-hand drive vehicles
  1. Torque: 4 Nm
All vehicles
  1. CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Torque: 18 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Fill the power steering system.
    Refer to: Power Steering System Filling - Vehicles With: Electro-Hydraulic Power Steering (EHPS) (211-00 Steering System - General Information, General Procedures).
  1. Bleed the power steering system.
    Refer to: Power Steering System Bleeding - Vehicles With: Electro-Hydraulic Power Steering (EHPS) (211-00 Steering System - General Information, General Procedures).

Power Steering Fluid Cooler - 1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma) > < Power Steering Pump to Steering Gear Pressure Line - Vehicles With: Electro-Hydraulic Power Steering (EHPS)