ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Radiator > < Block Heater

Focus 2004.75 (07.2004-)

Engine Cooling - 1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) - Thermostat Housing Focus 2004.75 (07/2004-)
Removal and Installation

Special Tool(s)

Remover/Installer, Coolant Hose Clamp

303-397
  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding - in this section.
  1. Remove the accessory drive belt tensioner. For additional information, refer to Section  303-05A Accessory Drive / 303-05B Accessory Drive.

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Thermostat housing to coolant expansion tank and heater core return coolant hose
See Removal Detail
2
-
Radiator lower to thermostat housing coolant hose
See Removal Detail
3
-
Thermostat housing

4. To install, reverse the removal procedure.

Removal Details

Item 1 : Thermostat housing to coolant expansion tank and heater core return coolant hose
  1. Using the special tool, disconnect the thermostat housing to coolant expansion tank and heater core return coolant hose.

Item 2 : Radiator lower to thermostat housing coolant hose
  1. Using the special tool, disconnect the radiator lower to thermostat housing coolant hose.

Radiator > < Block Heater