| Removal and Installation | | -
Evacuate the air conditioning (A/C) system.
For additional information, refer to: Klimaanlage entleeren, evakuieren und befüllen (412-00, General Procedures).
| 2. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Close off the A/C condenser to stop dirt from entering. 1 - Nut, refrigerant line to A/C condenser CAUTION:Close off the A/C compressor to stop dirt from entering. 3 - Outlet line, compressor to condenser 3. To install, reverse the removal procedure. NOTE:Install new refrigerant line O-rings. NOTE:Coat the refrigerant line O-rings with clean refrigerant oil before installation. Removal Details Item 2 : Bolt, refrigerant line to A/C compressor | | -
Raise and support the vehicle.
For additional information, refer to: Anheben mit Hebebühne (100-02, Description and Operation).
| | | -
Remove the engine undershield. | |
