ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Seat Backrest - 3-Door > < Rear Seat Cushion Cover - Convertible

Focus 2004.75 (07.2004-)

Seating - Rear Seat Cushion Focus 2004.75 (07/2004-)
Disassembly and Assembly

Disassembly

NOTE:
NOTE:The rear seat double cushion is shown in the procedure. The single cushion is similar.
  1. NOTE:
    NOTE:Retain the corner protector.
    Detach the seat cushion cover from the seat base.
    • Detach the plastic retaining strip.

  1. Remove the seat base.

  1. Detach the cushion cover from each side of the cushion.
    1. Roll the cushion cover towards the center to access the pleating hog rings.
    1. Cut the hog rings.

  1. Remove the cushion cover.
    1. Roll the cushion cover back to access the pleating hog rings.
    1. Cut the hog rings.

Assembly
  1. NOTE:
    NOTE:Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap 8 mm as illustrated.
    To assemble, reverse the disassembly procedure.

Front Seat Backrest - 3-Door > < Rear Seat Cushion Cover - Convertible