ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Door Latch Remote Control > < Exterior Luggage Compartment Lid Release Switch - Vehicles With: Keyless Vehicle System

Focus 2004.75 (07.2004-)

Handles, Locks, Latches and Entry Systems - Ignition Lock Cylinder Focus 2004.75 (07/2004-)
Removal and Installation

  1. Remove the passive anti-theft system (PATS) transceiver. For additional information, refer to Section  419-01A Anti-Theft - Active / 419-01B Anti-Theft - Passive.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Ignition key
See Removal Detail
2
-
Ignition lock cylinder locking button
See Removal Detail
3
-
Ignition lock cylinder
See Removal Detail
See Installation Detail

3. To install, reverse the removal procedure.

Removal Details

Item 1 : Ignition key
  1. Turn the ignition key to the ACCESSORY position.

Item 2 : Ignition lock cylinder locking button
  1. Using a suitable punch press the ignition lock cylinder locking button until the ignition lock cylinder is released from the steering column.

Item 3 : Ignition lock cylinder

  1. NOTE:
    NOTE:Make sure the ignition lock cylinder locking button is released before the removal of the ignition lock cylinder.
    Remove the ignition lock cylinder and ignition key.

Installation Details

Item 3 : Ignition lock cylinder
  1. Install the ignition lock cylinder.
    1. Turn the ignition key to the ACCESSORY position.
    1. Press the ignition lock cylinder locking button.

Door Latch Remote Control > < Exterior Luggage Compartment Lid Release Switch - Vehicles With: Keyless Vehicle System