Fusion FWD L4-2.5L Hybrid (2010)
-
Disconnect: ACCM C1469a .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuses. GO to Pinpoint Test K. See: Pinpoint Test K: The Air Conditioning Compressor Module (ACCM) Does Not Respond To
The Scan Tool
No
INSTALL the removed fuses. GO to AD12.
-------------------------------------------------
AD12 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DC/DC DISCONNECTED
-
Disconnect: DC/DC C1457d .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuses. GO to Pinpoint Test L. See: Pinpoint Test L: The DC To DC Converter Control Module (DC/DC) Does Not Respond To
The Scan Tool
No
INSTALL the removed fuses. GO to Pinpoint Test B. See: Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool
-------------------------------------------------
AD13 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE 4X4 MODULE DISABLED
-
Disconnect: SJB Fuses 11 (10A) and 35 (10A) .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuses. GO to Pinpoint Test H. See: Pinpoint Test H: The 4X4 Control Module Does Not Respond To The Scan Tool
No
INSTALL the removed fuses. GO to AD9.
-------------------------------------------------
AD14 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE IPC DISABLED
-
Disconnect: SJB Fuses 26 (15A) and 29 (5A) .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuses. GO to Pinpoint Test C. See: Pinpoint Test C: The Instrument Panel Cluster (IPC) Does Not Respond To The Scan Tool
