In-vehicle Repair Special Tool(s) | Installer, Wheel Hub 204-148 (14-037) | | Flange Holding Wrench, Universal 205-072 (15-030A) | | Remover, Crankshaft Oil Seal 303-293 (21-143) | | Remover, Crankshaft Vibration Damper 303-338 (21-153B) | Removal | -
Using the special tool, remove the timing belt. For additional information, refer to Timing Belt in this section. | | -
Remove the camshaft pulley. - Unscrew the camshaft pulley center bolt two revolutions.
- Remove the camshaft pulley.
| | -
Using the special tool and three M8 x 70 mm bolts, remove the camshaft pulley hub. | | -
Remove the camshaft oil seal. | Installation | -
NOTE:Do not coat the sealing lip with engine oil or grease. NOTE:Install a new camshaft oil seal. Using the special tool and M12 x 100 mm bolt, install the camshaft oil seal. | | -
NOTE:Do not tighten the camshaft pulley retaining bolts at this stage. Using the special tool, install the camshaft pulley hub together with the camshaft pulley and tighten the camshaft pulley hub. | | -
Install the timing belt. For additional information, refer to Timing Belt in this section. | | |