Disassembly and Assembly Disassembly | -
Remove the armrest. - Remove the screw cover.
- Remove the screw.
| | -
Remove the lumbar adjust handwheel. - Remove the cover.
- Remove the handwheel.
- Remove the surround.
| | -
Remove the folding tray. - Remove the trim cover.
- Remove the lower retaining pin.
- Remove the upper retaining pins.
| | -
Detach the retaining strip from the underside of the backrest. | | -
Detach the backrest cover front tensioning clips from both sides (right-hand side shown). - Roll the backrest cover upwards to access the clips.
| | -
Remove the head restraint. | | -
Remove the head restraint guides. - Using a suitable screwdriver, depress the locking tang.
| | -
Detach the lower spreader bar from the backrest (right-hand side shown). | | -
Detach the upper spreader bar from the backrest (right-hand side shown). | | -
Remove the backrest cover. | | -
Remove the anti-squeak mat. | | -
Detach the lumbar adjust cables from the backrest (if equipped). | | -
Remove the lumbar mat. - Detach the springs.
- Detach the lumbar mat mountings from the backrest frame.
| Assembly | -
To install, reverse the removal procedure. | | |