Ford Workshop Service and Repair Manuals

Installer, Halfshaft Oil Seal

308-039 (16-018)

Remover, Halfshaft Oil Seal

308-208 (16-074)

1. 

   CAUTION:Support the halfshaft. The inner joint must not be bent more than 18 degrees. the outer joint must not be bent more than 45 degrees.
   

   CAUTION:Pull the right-hand halfshaft out straight, otherwise the oil seal will be damaged.
   

   NOTE:Escaping oil.
   Remove the right-hand halfshaft and secure it. For additional information, refer to Section  205-04 Front Drive Halfshafts.

2. 

   NOTE:Escaping oil.
   Remove the left-hand halfshaft. For additional information, refer to Section  205-04 Front Drive Halfshafts.

3. Using the special tool, remove the left-hand front drive halfshaft oil seal.

1. Using the special tool, install the left-hand halfshaft oil seal.

2. Install the left-hand halfshaft. For additional information, refer to Section  205-04 Front Drive Halfshafts.

3. Install the right-hand halfshaft. For additional information, refer to Section  205-04 Front Drive Halfshafts.