Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
In-vehicle Repair >
< Bearing Check
Ikon 1999 (01.2000-)
Mechanical Repairs
3 Powertrain
308 Manual Transmission-Transaxle, Clutch and Transfer Case
308-03 Manual Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
Transmission Fluid Level Check
Manual Transmission/Transaxle - Transmission Fluid Level Check
Ikon 1999 (01/2000-)
General Procedures
General Equipment
Welding rod
Materials
Name
Specification
Manual transmission fluid
WSD-M2C200-C
Remove the transaxle filler plug.
Using an 80 mm length of suitable 2.5 mm diameter
welding rod
, fabricate a special tool.
Using the special tool, check the transmission fluid level and top up as necessary with clean
manual transmission fluid
.
Vehicles with 1.3L Endura E: 6 - 11 mm below the filler plug threads.
Vehicles with 1.3L Duratec 8V/1.6L and 1.8L diesel: 5 - 10 mm below the filler plug threads.
Install the transaxle filler plug.
Mechanical Repairs
3 Powertrain
308 Manual Transmission-Transaxle, Clutch and Transfer Case
308-03 Manual Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
Transmission Fluid Level Check
In-vehicle Repair >
< Bearing Check